Dismiss Notice
New Cookie Policy
On May 24, 2018, we published revised versions of our Terms and Rules and Cookie Policy. Your use of AstronomyConnect.com’s services is subject to these revised terms.

More Views

Baader SCT/T2 Universal Adapter for ETX / NX4 / C90 Mak/SCT Telescopes # NX4-ETX 2958500

4.8 (5 Reviews) Read Reviews Write Review
Brand Baader Planetarium
Part Number 2958500
Availability available

Product Info

Manufacturer Description

Baader now makes the perfect complement to your Celestron NexStar4, Meade ETX , or C90* telescope. The Baader NX4-ETX Universal Adapter allows you to adapt various photo-visual accessories that use either T-thread or standard 2" SCT thread to these telescopes.

This adapter actually consists of two different parts that can be used individually or together (see photo 2). The first adapter (A) has a female 1.375"x24TPI (almost 35mm) thread on one side to attach to your telescope. The other side has a standard male SCT thread (2"x24TPI). If you use only this adapter, you can attach standard SCT threaded accessories meant for larger SCT scopes to your telescope.

The second adapter (B) has a female SCT thread on one side and a standard male T / T2 thread on the other side. Obviously, this adapter cannot be used by itself on NX4/ETX/C90 scopes, but when coupled with Adapter A (see photo 1), it converts the NX4/ETX male thread on your scope to a T thread for attachment of various T threaded accessories and camera/imaging equipment. The T thread ring is fully rotatable, allowing you to orient/rotate any accessories attached to it.

Adapter A also incorporates an internal 1.25" female filter thread which allows you to install any 1.25" filter inside the adapter. This allows you to direct couple any accessory and still be able to incorporate photo or visual filters in the optical path. Or install a clear UV/IR cut filter to completely seal your telescope from dust and the elements. 1.25" filters can be attached in this manner whether you use Adapter A by itself or in combination with Adapter B.

Both adapter rings (A and B) feature wide fluted surfaces to enable a better grip for secure locking. Adapter A has a total length of 17.5mm and weighs 1.8oz. Adapter B has a total length of 20mm and weighs 0.9oz. The combination (A+B) has a total length of 30.5mm and weighs 2.7oz.

*Important Note: The Meade ETX and Celestron Nexstar telescopes feature a 1.375"x24TPI male thread on the rear of the scope. Many - BUT NOT ALL - older Celestron C90 spotting scopes also feature this thread. It is your responsibility to check the thread on your scope to make sure that this item will work with it. We cannot be responsible for any fit issues if your scope does not have the NX4/ETX thread specified on this adapter.

Reviews

4.8 (Based on 5 Reviews) 100% of reviewers recommended this product.
Rating Distribution
Sort by
  • Date
  • Rating
  • Useful
    1. Guest

      Skill Level
      Unknown
      Time with Product
      Unknown
      User Notes:
      Review by Jesse P.
      1563338792
      Jul 16, 2019

      4.0 adapter has several options for

      Pros:

      Cons:

      Comments:

      adapter has several options for fitting different items like a DSLR via t-adapter or 1.25" eyepiece threads. very versatile

      Bottom Line: Would you recommend this item? Yes
      Was this review helpful? Yes / No

      This review was provided courtesy of AgenaAstro.com

    2. Guest

      Skill Level
      Unknown
      Time with Product
      Unknown
      User Notes:
      Review by Andrew S.
      1516167438
      Jan 16, 2018

      5.0 Hard to find Adapter

      Pros:

      Cons:

      Comments:

      This is made of high quality metal and not plastic. Fit the threads on my old style orange Celestron C-90 perfectly!

      Bottom Line: Would you recommend this item? Yes
      Was this review helpful? Yes / No

      This review was provided courtesy of AgenaAstro.com

    3. Guest

      Skill Level
      Unknown
      Time with Product
      Unknown
      User Notes:
      Review by Richard C.
      1502555213
      Aug 12, 2017

      5.0 Customer service was outstanding. However,

      Pros:

      Cons:

      Comments:

      Customer service was outstanding. However, the product didn't work on my older style Celestron C90 scope. I was only able to get maybe 1/2 a turn before resistance. The product is well made & its probably worth a try if you are trying to upgrade the cheap .96 to 1.25 diagonal that came with the scope.

      Bottom Line: Would you recommend this item? Yes
      Was this review helpful? Yes / No

      This review was provided courtesy of AgenaAstro.com

    4. Guest

      Skill Level
      Unknown
      Time with Product
      Unknown
      User Notes:
      Review by HAN Z.
      1487340386
      Feb 17, 2017

      5.0 great choice

      Pros:

      Cons:

      Comments:

      work perfectly to help to convert Mark to SCT

      Bottom Line: Would you recommend this item? Yes
      Was this review helpful? Yes / No

      This review was provided courtesy of AgenaAstro.com

    5. Guest

      Skill Level
      Unknown
      Time with Product
      Unknown
      User Notes:
      Review by Cthulhu of Turkey, Ankara.
      1349049600
      Sep 30, 2012

      5.0 Great Improvement

      Pros:

      Strong Construction,Compact,Accurate,Easy to Use

      Cons:

      Heavy

      Comments:

      Before buying this equipment, I couldnt attach 1.25" filters and focal reducers to my ETX-125. With this item, I'm so happy to attach any neccessary equipment..It's very useful and easy to use.

      Bottom Line: Would you recommend this item? Yes
      Was this review helpful? Yes / No

      This review was provided courtesy of AgenaAstro.com

    Sort by
    • Date
    • Rating
    • Useful