-
Final Announcement: We're Saying Goodbye to AstronomyConnect. Read Our Closing Notice.
Dismiss Notice
New Cookie Policy
On May 24, 2018, we published revised versions of our Terms and Rules and Cookie Policy. Your use of AstronomyConnect.com’s services is subject to these revised terms.
View the Latest Focusers & Accessory Reviews
Item
Submitted By
GSO 2" Crayford Focuser for Refractors - Dual Speed (with 96.6mm Telescope Adapter)
Good upgrade.
Bought this to put on a ST120F5, the stock R&P was fine however as its rather course and hitting the sweet spot is fiddly, a good upgrade, too bad the Canadian dollar is worth a lot less than the US one however I consider it money well spent.
Bought this to put on a ST120F5, the stock R&P was fine however as its rather course and hitting the sweet spot is fiddly, a good upgrade, too bad the Canadian dollar is worth a lot less than the US one however I consider it money well spent.
Jul 31, 2019
Feather Touch Micro Focuser for Celestron CPC800, NexStar 6SE / 8SE & C8 Edge HD SCT #...
great upgrade to the standard Celestron focuser
This is a major improvement to the standard Celestron focuser on the Nexstar 8SE. Gives fine controlled focus and install easily. Allows a very light touch with the fingers to focus clearly without causing too much shake.
This is a major improvement to the standard Celestron focuser on the Nexstar 8SE. Gives fine controlled focus and install easily. Allows a very light touch with the fingers to focus clearly without causing too much shake.
GSO 2" Crayford Focuser for SCTs - Dual Speed
Good item for focusing
This item is good at fine tune the focus, but it will increase the length of C8-A OTA and now I cannot put the OTA in vertical position(before It can)
This item is good at fine tune the focus, but it will increase the length of C8-A OTA and now I cannot put the OTA in vertical position(before It can)
GSO 2" Linear Bearing Crayford Focuser for Refractors - Dual Speed (with 96.6mm Flange)
met the specs exactly!
The important part of this purchase was that the focuser provide increased back focus for NV use with an ST120 and the focuser, by matching the dimensions in Agena's description, did that very well.
The important part of this purchase was that the focuser provide increased back focus for NV use with an ST120 and the focuser, by matching the dimensions in Agena's description, did that very well.
Jul 23, 2019
Feather Touch Micro Focuser for Meade 10" or 12" SCT (LX90, LX200GPS & LX200 Classic)...
Great addition
This is just what I needed for my image fine adjustment. It was very easy to install
This is just what I needed for my image fine adjustment. It was very easy to install
GSO 2" Crayford Focuser for Reflectors - Single Speed
Service was great. Quick with
Service was great. Quick with a quality product at a fair price
Service was great. Quick with a quality product at a fair price
GSO 2" Linear Bearing Crayford Focuser for Reflectors - Dual Speed
Linear bearing Crayford
I had the roller bearing version originally. Unlike this linear bearing version, it had limited load capacity. Was fine with lower loads but balked at Televieimage amplifier and binoviewer combination. In contrast, this linear bearing focuser is desi...
I had the roller bearing version originally. Unlike this linear bearing version, it had limited load capacity. Was fine with lower loads but balked at Televieimage amplifier and binoviewer combination. In contrast, this linear bearing focuser is desi...
Jul 13, 2019
GSO 2" Crayford Focuser for SCTs - Dual Speed
Cured the image shift
My Orion 150mm mak suffered from image shift until the GSO Crayford. I just got it as close as possible then went to fine adjustment. Jupiter never looked so good. Of course, the focal length was increased, so, on a very good-seeing night, I was look...
My Orion 150mm mak suffered from image shift until the GSO Crayford. I just got it as close as possible then went to fine adjustment. Jupiter never looked so good. Of course, the focal length was increased, so, on a very good-seeing night, I was look...
GSO 2" Crayford Focuser for SCTs - Dual Speed
greatly improves the focusing of my Nexstar
I purchased this Crawford Focuser to aid my kids and friends use of the NexStar SCT - with this focuser, it's really easy to get a very crisp image in the eyepiece. Yes, a big expense and was a little skeptical of the cost/benefits, but if my wi...
I purchased this Crawford Focuser to aid my kids and friends use of the NexStar SCT - with this focuser, it's really easy to get a very crisp image in the eyepiece. Yes, a big expense and was a little skeptical of the cost/benefits, but if my wi...
Feather Touch Focuser 2" Adapter for Orion Sky Quest, XT Intelliscope Telescopes with...
It Works. Expensive.
Put this right into the baseplate of the stock focuser on my XX12i. Has leveling screws and attachment screws. Feather Touch focuser attaches with three additional screws in the side of this adapter. It's expensive for a block of metal with som...
Put this right into the baseplate of the stock focuser on my XX12i. Has leveling screws and attachment screws. Feather Touch focuser attaches with three additional screws in the side of this adapter. It's expensive for a block of metal with som...
GSO 2" Crayford Focuser for Refractors - Dual Speed (with 86.4mm Telescope Adapter)
Great focuser for not a
Great focuser for not a lot of money.
Great focuser for not a lot of money.
230mm Base Plate for 8"/10" Telescopes (Type 1A)
Beautifully made
I have a lathe and was able to use this plate to fit a Vixen focuser to my 8" Newtonian.
I have a lathe and was able to use this plate to fit a Vixen focuser to my 8" Newtonian.
GSO 2" Crayford Focuser for Reflectors - Dual Speed
Very Nice
Very nice focuser.. fit perfectly on a 12" Meade Light Bridge. No modifications needed to be made. I installed it in under 5 minutes. 303mm base plate was a direct fit.
Very nice focuser.. fit perfectly on a 12" Meade Light Bridge. No modifications needed to be made. I installed it in under 5 minutes. 303mm base plate was a direct fit.
Jun 12, 2019
GSO 2' Crayford Focuser for SCTs - Single Speed
Well made...
Top-drawer stuff. Happy with. But only useful on my 8" SCT scope. Not enough clearance for a 5 or 6 in SCT, in my case. Sure helps an SCT scope focus more like my good refractors, with mm focus tube increments.
Top-drawer stuff. Happy with. But only useful on my 8" SCT scope. Not enough clearance for a 5 or 6 in SCT, in my case. Sure helps an SCT scope focus more like my good refractors, with mm focus tube increments.
GSO 2" Crayford Focuser for Reflectors - Dual Speed
part was what was advertised.
part was what was advertised. It works and does what I want it to.
part was what was advertised. It works and does what I want it to.
GSO 2" Linear Bearing Crayford Focuser for SCTs - Dual Speed
Always have had good luck with GSO
Like other GSO products I've ordered in the past, this focuser fit right on my C8.
Like other GSO products I've ordered in the past, this focuser fit right on my C8.
Feather Touch Micro Focuser for Celestron CPC800, NexStar 6SE / 8SE & C8 Edge HD SCT #...
Fantastic
This is supposed to be a “nice to have” item but not essential. After using it the “nice to have” is B.S. I’m not giving it up, ever. It’s expensive but if anyone is looking to do a simple upgrade on their scope this focuser should be num...
This is supposed to be a “nice to have” item but not essential. After using it the “nice to have” is B.S. I’m not giving it up, ever. It’s expensive but if anyone is looking to do a simple upgrade on their scope this focuser should be num...
Agena Synta / Vixen Style Dovetail Mounting Base / Shoe for Finders - M4 Screw for GSO...
Permits mounting finder on GSO 2" Crayford focuser
Like others, I replaced the original tailpiece of my Celestron Wideview 80 with a GSO 2" focuser. The original had a finder mount shoe built in. The crayford replacement did not. This provided a simple solution, allowing me to use any of my fi...
Like others, I replaced the original tailpiece of my Celestron Wideview 80 with a GSO 2" focuser. The original had a finder mount shoe built in. The crayford replacement did not. This provided a simple solution, allowing me to use any of my fi...
May 23, 2019
GSO 2" Crayford Focuser for Refractors - Single Speed (with 86.4mm Telescope Adapter)
Celestron 90GT OTA fitment
Fit right in with the original screws. Also easily attached the adapter (sold separately) for my finder scope. Way smoother than the stock focuser. Had my first night of ultimate seeing soon after installation. Able to get great focus at near maximum...
Fit right in with the original screws. Also easily attached the adapter (sold separately) for my finder scope. Way smoother than the stock focuser. Had my first night of ultimate seeing soon after installation. Able to get great focus at near maximum...
Agena Synta / Vixen Style Dovetail Mounting Base / Shoe for Finders - M4 Screw for GSO...
Nice but
But it could come with two cone head m4 screws instead of just one
But it could come with two cone head m4 screws instead of just one
Page 1 of 28